Home  /  Advice  /  Decks

Why your deck is going grey or black, and what to do about it

Neil Huggett
Neil Huggett
Director, Proview Painting · NSW Lic. 254277C · Updated November 2026 · 5 min read
Quick answer: A deck goes grey when the sun breaks down the surface of the timber after the oil has worn off. It goes black from mould growing in damp, shaded spots, or from tannin in the timber reacting with iron, which is common on merbau. Both are fixed with a proper clean, a sand where needed, and a fresh coat of oil.
Hardwood deck and step with a fresh coat of oil, glossy and evenly coloured
Coogee backyard deck after sanding and oiling by Proview Painting
Coogee backyard deck before sanding and oiling, faded and weathered boards
BeforeAfter

Backyard deck, Coogee. Drag the handle to compare before and after.

This is one of the most common things I get asked about decks. Someone oiled it a year or two ago, and now it's either silver grey in the sun or going black in the corners. The good news is it's usually fixable. The trick is working out which problem you've got, because they're fixed differently.

Why it goes grey

Grey is UV damage. Once the oil has worn away, the sun starts breaking down the top layer of timber fibres, and they bleach to that silver colour. It shows up first on the boards that get the most sun. A grey surface is dead timber, so new oil won't bond to it properly. It needs to be cleaned and usually sanded back to fresh timber before it's oiled again.

Why it goes black

There are three usual causes:

  • Mould and mildew. Shaded, damp parts of a deck, under trees or on the south side, stay wet through winter. Mould grows on the surface and feeds on dirt and old oil, leaving black spots or patches.
  • Tannin and iron. Merbau and some other hardwoods are full of tannin. When it meets iron, from steel nails, steel wool, or even metal furniture legs, it turns black. This often shows as dark streaks or rings.
  • Dirt trapped in old oil. Oil that's been put on thick, or over a dirty deck, can trap grime and go dark over time.

How each one is fixed

ProblemWhat fixes it
Grey timberA deck clean, then a sand back to fresh timber, then oil
MouldA deck cleaner that kills the mould, a rinse, then oil once it's fully dry
Tannin and iron stainsA timber brightener, usually oxalic acid based, which lifts the black marks
Dirty, dark old oilA strip or sand back, then fresh oil in thinner coats

High pressure on soft, weathered boards can fur the surface and make it worse, so take care if you're cleaning it yourself.

If yours needs a proper sand and oil, see our deck restoration page. Weighing up oil against stain or paint? Our oil, stain or paint guide compares them.

How to stop it coming back

  • Recoat before it goes grey. A maintenance coat while the deck still looks good is much less work than a full sand later.
  • Keep it clean. A sweep and a wash a couple of times a year stops dirt and mould building up.
  • Let it breathe. Trim back plants and keep pots off the boards so the shady spots can dry out.
  • Use the right product for the spot. A deck in full sun near the beach needs a different approach from one under a tree.

Not sure when yours is due? See how often to oil a deck in Sydney.

How to stop merbau changing colour

Merbau naturally darkens and then greys in the sun. You can't stop it completely, but regular oiling, ideally with a tinted oil, slows it right down and keeps the colour richer for longer.

Deck gone grey or black?

Call me on 0416 070 326 and I'll come and tell you what it needs.

Frequently asked questions

Why has my decking gone black?

Usually from mould in damp, shaded areas, or from tannin in the timber reacting with iron. Merbau is especially prone to the second.

How do I remove black stains from a timber deck?

Mould comes off with a deck cleaner made to kill it. Tannin and iron stains usually need a timber brightener, often oxalic acid based. Let the deck dry fully before you oil it again.

How do I stop merbau changing colour?

You can slow it down, but not stop it. Keep it oiled regularly, ideally with a tinted oil, and recoat before it starts to grey.

Does decking oil go bad?

On the deck, yes. Sun and foot traffic wear it down, which is why it needs recoating. In the tin, an opened can can skin over or thicken with time, so check it before you use it.

Deck restoration in Coogee · Deck restoration across the Eastern Suburbs

Get your real number, free

Walked, written, itemised quotes across the Eastern Suburbs. No obligation.

Get a Free Quote 0416 070 326

Plan your painting project